Private Label Mud Mask
Mineral mud with a passport — the spa story in a jar.
What a mask batch record carries
Filling runs on GMPC and ISO 22716 certified lines in-house under licence 粤妆20250206, with traceability from raw material to carton on each batch.
For a mask the record carries fill weight, the appearance check and the in-use preservation results for the format you selected, plus the dwell-time behaviour recorded on your retained Golden Sample.
The actives and the carrier behind them
INCI names and typical levels reflect publicly documented formulation practice. All values are adjustable in your build.
| Ingredient (INCI) | Typical Level | Function & Benefit |
|---|---|---|
| Maris Limus (Sea Silt) Extract | 20–40% | Origin mineral story |
| Kaolin | 10–20% | Smooth spreading base |
| Glycerin | 3–5% | Comfort buffer |
| Aloe Barbadensis Leaf Juice | 2–5% | Soothing hydration |
What gets decided before the dwell time
Preservative load in a wet sheet
A saturated substrate is a high-water environment with a large surface area. The preservation study is run on the finished unit, not the bulk alone.
Adhesion and fit
A sheet that lifts at the edges is judged a bad mask regardless of what is in it. Cut and material are part of the specification.
Preservation after opening
A jar mask meets air and fingers at every use, so the preservation study runs against that in-use pattern rather than sealed shelf life alone.
Drying behaviour can be designed
Whether a clay mask tightens or stays comfortable is decided by the clay blend and the humectant level, not by the clay alone.
Wet formats and dry formats fail differently
A sheet mask fails through the pack — a seal that leaks, a substrate that dries out, a saturation level that will not hold. A clay mask fails on skin — it sets too hard, it cracks, or it will not rinse clean.
Neither is a formula problem in the ordinary sense, and both are found by testing the finished unit the way the customer uses it rather than the bulk in a jar.
Mask formats and what each one delivers
A mask that dries too fast and one that never sets are the same failure told from opposite ends.
| Format | Release behaviour | Typical brief |
|---|---|---|
| Clay and mud | Absorptive, drying, visibly tightening | Purifying and oil-control positioning |
| Biocellulose sheet | Tight adhesion, even delivery | Premium single-use masks |
| Cream and sleeping | Leave-on, no rinse, slow release | Overnight and hydration-led routines |
| Sleeping gel | Absorbs fully, no rinse, no tack | Overnight routines for oily skin |
Mud mask sells origin: Dead Sea sediment, glacial marine clay, moor mud — each carries a mineral story and a spa geography customers travel to in their imagination. The gray-brown texture reads 'earthy and real' in a way refined clays do not.
We source authenticated origin muds with mineral-analysis documentation, blend for a smooth (not gritty) spread, and support the face-and-body dual positioning that spa retail expects.
Formats and order quantities
Mixed-variant orders can split the stated MOQ across formats under one brand.
| Format / Specification | MOQ | Lead Time |
|---|---|---|
| Dead Sea mud mask 100 ml jar | 1,000 pcs | 10–15 days |
| Marine mud + algae blend 100 ml | 1,000 pcs | 10–15 days |
| Spa set (mud mask + body scrub) | 1,000 sets | 10–15 days |
MOQ and lead time above are the standard liquid, cream and gel route. The real minimum is set by the manufacturing system rather than the category: surfactant systems (shampoo, body wash) start at 2,000 pcs, stick formats at 3,000, and powders and sheet masks at 5,000 — with longer production runs to match.
Dwell time and usage questions
Mud vs. clay — the difference?
Mud brings origin sediment and mineral complexity; clay is the refined absorber. Mud sells story, clay sells function — premium shelves want both.
Is it gritty?
We mill and sieve the sediment so the spread is smooth — grit belongs in scrubs, not masks.
Can it go on the body?
Yes — back and shoulder application is standard spa use; the 200 ml body size shares the formula.
Where this formula can be adjusted
- Origin authentication documentation
- Grit-free spread engineering
- Face + body dual labeling
- Spa retail display program
Other mask formats we manufacture
Private Label Charcoal Mask
The black jar that photographs itself — activated charcoal deep-cleanse.
Private Label Clay Mask
The 10-minute ritual with the visual demo — clays that purify without the tight-squeak.
Private Label Salt Body Scrub
The deep polish for rough zones — mineral salt scrubs for feet, elbows and pre-tan prep.
Buyer guides for this build
Before you brief a supplier on this category, these are the guides that answer the questions buyers ask next — timelines, order quantities, cost structure and compliance.
The route a dwell-time product takes through production
- 1
Verify the cut and fit
Cut geometry is checked against the reference so the mask sits the way the approved sample did.
- 2
Seal each unit
Sealing is validated for the pack, because a failed seal becomes a dried-out product on the shelf.
- 3
Run the in-use preservation study
For a jar format the study replicates real opening and contamination, not just the sealed shelf life.
- 4
Set the dwell time and the claim
How long the mask stays on decides how much active it can carry and what it can credibly claim.
Bring the texture reference
If you want a mask that sets to a specific feel, send the reference. We rebuild a comparable base and your approved sample becomes the production reference.