Private Label Exfoliating Toner
The daily-glow AHA toner — low enough for routine use, acidic enough to earn the claim.
Every format this base can be filled in
Mixed-variant orders can split the stated MOQ across formats under one brand.
| Format / Specification | MOQ | Lead Time |
|---|---|---|
| Glycolic 7% toner 150 ml | 1,000 pcs | 10–15 days |
| Glycolic 5% + panthenol entry toner 150 ml | 1,000 pcs | 10–15 days |
| PHA gentle renewal toner 150 ml | 1,000 pcs | 10–15 days |
MOQ and lead time above are the standard liquid, cream and gel route. The real minimum is set by the manufacturing system rather than the category: surfactant systems (shampoo, body wash) start at 2,000 pcs, stick formats at 3,000, and powders and sheet masks at 5,000 — with longer production runs to match.
Pair it with these builds
Private Label AHA/BHA Exfoliating Mask
The weekly reset peel — high-dose acids in a wash-off format that keeps claims comfortable.
Private Label Hydrating Face Toner
The watery-essence toner that K-beauty taught the world — hydration as a ritual step.
Private Label Toner Pads
The one-step format Gen Z actually finishes — pre-soaked pads with visible-before/after demos.
Buyer guides for this build
Before you brief a supplier on this category, these are the guides that answer the questions buyers ask next — timelines, order quantities, cost structure and compliance.
The actives and the levels they work at
INCI names and typical levels reflect publicly documented formulation practice. All values are adjustable in your build.
| Ingredient (INCI) | Typical Level | Function & Benefit |
|---|---|---|
| Glycolic Acid | 5–7% | Daily surface renewal |
| Gluconolactone (PHA) | 3–5% | Ultra-gentle polyhydroxy route |
| Allantoin | 0.2–0.5% | Comfort buffer |
Exfoliating toners turned the category from 'wiping cotton pads' into chemistry: 5–7% glycolic at pH 3.4–3.6 delivers daily gentle renewal, and the glow claim keeps customers photographing their skin. Buffer actives like panthenol and allantoin keep the daily use comfortable.
We tune two strengths — 5% for entry and sensitive shelves, 7% for results positioning — and verify pH per batch, because below-buffer AHA builds drift and irritate. A PHA (gluconolactone) variant serves the ultra-gentle niche.
Where a fluid build succeeds or fails
The dropper or the pump
Dispensing decides dose consistency and how much air the product meets in use. It is a formulation-adjacent choice, not just a packaging one.
Compatibility between actives
Two actives that work alone can destabilise each other in the same bottle. Combinations are tested rather than assumed.
Light is a reagent
UV accelerates the same reactions that heat does. Clear glass looks premium on a shelf and is usually the worst choice for a sensitive active.
A buffer has a capacity
A buffer holds pH only across a limited range of incoming acid or base. Beyond that it gives way, so the capacity is checked against what the formula will actually meet rather than assumed.
Co-solvents buy solubility and charge for it
Adding a glycol or an alcohol widens what a water-based system can dissolve, and it is often the only way to carry a difficult active. The trade is that it also moves preservation, viscosity and how the product feels on skin.
Those side effects are consequences rather than surprises, and they are designed for from the start. Discovering them at the preservation study is where a launch schedule is usually lost.
Fluid bases and what each one can carry
The base is chosen around the least stable thing in the formula rather than around the headline ingredient.
| Route | Barrier it needs | Where it fits |
|---|---|---|
| Micellar system | Surfactant-stabilised, clear pack | Cleansing waters and no-rinse formats |
| Glycol-rich fluid | Modest barrier, higher water activity | Actives that need solubility more than protection |
| Low-water fluid | Airless or aluminium-barrier pack | Actives sensitive to oxygen and light |
| Alcohol-based tonic | Simple pack, evaporating base | Oil-control formats and fast-dry tonics |
pH, stability and shelf-life questions
Daily AHA at 7% — is that safe to claim?
At pH 3.4–3.6 with buffers it is the established retail pattern; documentation covers dose, pH and intended use guidance.
What is PHA and who is it for?
Polyhydroxy acids exfoliate more gently and suit reactive skin; the gluconolactone build is our sensitive-shelf answer.
Can it be layered with vitamin C?
Alternate or use vitamin C in the morning routine; we provide pairing guidance for the insert card.
Traceability from raw material to carton
Each batch is traceable from the incoming raw material through to the sealed carton, on GMPC and ISO 22716 certified lines operating under licence 粤妆20250206.
For a fluid the traceability record is read with the retained Golden Sample and the stability data, because colour, clarity and assay each move on their own timeline.
From brief to released fluid, step by step
- 1
Set the pH window
The range is defined by the most sensitive active in the system, with a tolerance production can actually hold.
- 2
Fix the active system
Routes and levels are set against the claim, then checked for compatibility with each other before the base is built.
- 3
Choose the barrier pair
Oxygen and light barriers are selected together with the pack, since either one alone leaves an oxidation route open.
- 4
Verify dosage across the pack
Where the pack meters a dose, the delivered volume is checked across the life of the pack rather than only when it is full.
What you can change on this build
- 5% entry vs 7% results strengths
- AHA or PHA active systems
- 150 ml standard with 50 ml travel
- pH-per-batch documentation
Name the active that has to survive
One ingredient usually decides the whole base. Tell us which one matters most and we build the protection and the pack around it.