Private Label Biocellulose Mask
The second-skin sheet — coconut fermentation fiber that clings like nothing else.
Biocellulose is the sheet category's material upgrade: fermented coconut-water fiber, originally developed for burn dressings, that adheres to facial contours like a second skin and holds essence far better than nonwoven fabrics. The customer feels the price difference in thirty seconds.
We source medical-grade biocellulose sheets and pair them with essence systems matched to the fiber's transfer rate — a premium sheet with cheap essence is the category's classic mistake. Spa and clinic channels are the natural home.
What brands ask us about this category
Why does biocellulose cost more?
The fiber is grown by fermentation over days and mimics burn-dressing material — the cling and essence-holding are physically superior; customers feel it immediately.
How long is wear time?
15–20 minutes standard, and the cling lets customers move around — a real advantage over slipping nonwovens.
Can we do a full premium line?
Yes — biocellulose face plus eye patches share the substrate; spa sets are a proven structure.
Four levers on a mask
Drying behaviour can be designed
Whether a clay mask tightens or stays comfortable is decided by the clay blend and the humectant level, not by the clay alone.
Sheet saturation level
A sheet can hold only so much liquid without dripping. Saturation is tuned against the pack, the shelf life and how the customer applies it.
Single-use versus multi-use
A sachet removes in-use contamination, a jar gives better economics. The choice is a market decision with a formulation consequence.
Appearance in the jar
Clay and cream masks can settle or dry in the pack. Fill level and pack geometry are chosen to keep appearance consistent.
What is delivered during the dwell
INCI names and typical levels reflect publicly documented formulation practice. All values are adjustable in your build.
| Ingredient (INCI) | Typical Level | Function & Benefit |
|---|---|---|
| Fermented Coconut Water (base) | sheet substrate | Ultra-fine fiber network |
| Niacinamide | 2–4% | Tone support in essence |
| Acetyl Hexapeptide-8 | 1–2% | Line-look peptide |
| Beta-Glucan | 0.5–1% | Calming hydration |
The paperwork that travels with a mask order
Manufacturing takes place in-house under GMPC and ISO 22716 certification, licence 粤妆20250206, with raw-material-to-carton traceability on each batch.
Every production order ships with a certificate of analysis, a stability summary, a microbiology report and MoCRA / CPNP-ready documentation.
For a wet format the retained Golden Sample is the reference for how the product dries, sets and rinses — properties that no single instrument reading captures.
A mask is a dwell-time product
What separates a mask from a cream is less about the ingredients than about the time the customer leaves it on the skin. That dwell time is the design brief: the product has to deliver something visible in ten or twenty minutes without becoming uncomfortable.
It also means the format sets expectations before any ingredient does. A mask that dries too fast, or slides down the face, is judged long before its actives are.
Dwell-time formats and what each one does
A mask that dries too fast and one that never sets are the same failure told from opposite ends.
| Format | Release behaviour | Typical brief |
|---|---|---|
| Wash-off cream mask | Rinses clean and leaves no residue | Hydration in a short routine step |
| Clay and mud | Absorptive, drying, visibly tightening | Purifying and oil-control positioning |
| Overnight leave-on | Absorbs fully with no rinsing step | Routines built around sleep |
| Sleeping gel | Absorbs fully, no rinse, no tack | Overnight routines for oily skin |
Masks that pair with it
Private Label Sheet Masks
The gifting and travel hero — substrate choice decides everything, and we stock all three tiers.
Private Label Hydrogel Mask
The cooling jelly patch — essence dissolved into the sheet itself.
Private Label Eye Masks
The 15-minute photo op — hydrogel patches that chill, de-puff and film beautifully.
Buyer guides for this build
Before you brief a supplier on this category, these are the guides that answer the questions buyers ask next — timelines, order quantities, cost structure and compliance.
Formats and order quantities
Mixed-variant orders can split the stated MOQ across formats under one brand.
| Format / Specification | MOQ | Lead Time |
|---|---|---|
| Biocellulose mask 25 g + essence 20 ml | 1,000 pcs | 10–15 days |
| Biocellulose + peptide firming essence | 1,000 pcs | 10–15 days |
| 5-pack professional box | 1,000 boxes | 10–15 days |
MOQ and lead time above are the standard liquid, cream and gel route. The real minimum is set by the manufacturing system rather than the category: surfactant systems (shampoo, body wash) start at 2,000 pcs, stick formats at 3,000, and powders and sheet masks at 5,000 — with longer production runs to match.
From brief to released mask, step by step
- 1
Verify the cut and fit
Cut geometry is checked against the reference so the mask sits the way the approved sample did.
- 2
Tune the drying and comfort profile
The mask is assessed on skin for the full dwell time, not only at the moment of application.
- 3
Set the dwell time and the claim
How long the mask stays on decides how much active it can carry and what it can credibly claim.
- 4
Match the pack to the usage
Sachet, tube or jar, chosen against single-use or multi-use consumption patterns in the destination market.
What can be adjusted on this mask
- Medical-grade substrate sourcing docs
- Essence-to-fiber transfer matching
- Spa professional 5-pack displays
- Premium gold-foil pouch packaging
Send the single-use question
Sachet or jar changes the preservation file and the unit economics. Tell us which way you are leaning and we quote both.