Private Label Color Protect Conditioner
Seal the color in — acid-pH emulsions that close the cuticle dye escapes through.
Viscosity is a curve, not a number
An emulsion thickens and thins as it cools, and the curve looks different for every emulsifier system. The figure on a specification sheet is one point on that curve, measured at one temperature.
That matters at fill as much as at the shelf. The product has to flow through the line while still setting to the texture the customer expects in the jar, so fill temperature and cooling rate are treated as part of the formulation.
Where each route fits a brief
Each route below is a different balance of oil phase, emulsifier and thickener, not a different marketing story.
| Route | Texture character | Typical brief |
|---|---|---|
| Light lotion | Fast-absorbing with little residue | Volume body and face lines sold on daily use |
| Oil-rich paste | High oil phase, low water | Balm-adjacent textures delivered from a tube |
| Anionic-emulsified | Classic body, broad compatibility | Mainstream creams where cost leads |
| Lamellar (liquid crystal) | Rich, layered, slow-release feel | Barrier creams and premium night products |
Every format this base can be filled in
Mixed-variant orders can split the stated MOQ across formats under one brand.
| Format / Specification | MOQ | Lead Time |
|---|---|---|
| Color protect conditioner 300 ml | 1,000 pcs | 10–15 days |
| Cool-deposit conditioner 300 ml | 1,000 pcs | 10–15 days |
| Shampoo + conditioner + mask trio set | 1,000 sets | 10–15 days |
MOQ and lead time above are the standard liquid, cream and gel route. The real minimum is set by the manufacturing system rather than the category: surfactant systems (shampoo, body wash) start at 2,000 pcs, stick formats at 3,000, and powders and sheet masks at 5,000 — with longer production runs to match.
The conditioner half of color care does the mechanical work: acid-pH emulsions contract and seal the cuticle scale that dye molecules escape through, while deposit traces top up tone. Shine returns as a free bonus because sealed cuticles reflect light uniformly.
We build matched to the protect shampoo in pH and active system, so the pair's claims reinforce rather than duplicate. Deposit variants (warm, cool, red) extend the system into the tone-maintenance niche that purple shampoo proved.
The stages this emulsion passes through
- 1
Build the rheology
Thickener and fatty alcohol levels are tuned to reach the viscosity and yield point the pack format needs.
- 2
Confirm the fill on the line
Fill weight and appearance are verified on the production line, because a base that behaves well on the bench can still trap air in a filler.
- 3
Cool on a controlled ramp
The cooling rate decides how the fatty alcohols and butters crystallise, and therefore how smooth the finished cream turns out.
- 4
Set the phase temperatures
Oil and water phases are heated to matched temperatures so the emulsion forms evenly rather than shocking one phase into the other.
Where an emulsion succeeds or fails
Silicone or silicone-free
Silicones give instant, predictable slip. A silicone-free route has to rebuild that feel with esters and butters — both work, and the choice is usually a market one.
Droplet size sets the texture
A finer dispersed phase reads smoother and absorbs faster; a coarser one reads richer. It is decided by the shear applied during emulsification rather than by the oil percentage alone.
Cooling rate sets the crystal
Fatty alcohols and butters crystallise as the batch cools. Ramp the temperature too quickly and the texture turns grainy in a way that only shows up weeks later.
The oil phase sets the feel
Emollient choice decides absorbency, slip and after-feel. It is the single biggest lever on whether the product reads as premium or value tier.
What the oil phase is carrying
INCI names and typical levels reflect publicly documented formulation practice. All values are adjustable in your build.
| Ingredient (INCI) | Typical Level | Function & Benefit |
|---|---|---|
| Behentrimonium Methosulfate | 1.5–3% | Cuticle-sealing deposit |
| Citric Acid | 0.1–0.3% | Acid-pH contraction |
| Hydrolyzed Keratin | 0.5–1% | Fiber surface fill |
Formulas that sit beside this one
Private Label Color Protect Shampoo
Fade defense for the colored-hair economy — sulfate-free systems with UV-assist filters.
Private Label Hair Mask
The weekly intensive that photographs as luxury — rich treatments with measurable results.
Private Label Purple Shampoo
Brass correction in a bottle — pigment-tuned violet systems for blonde and silver clients.
Buyer guides for this build
Before you brief a supplier on this category, these are the guides that answer the questions buyers ask next — timelines, order quantities, cost structure and compliance.
What brands ask us about this category
Why does pH matter for color?
Alkaline conditions lift the cuticle and dye leaches out; acid-pH conditioners contract the scale — it is the mechanism, not a marketing story.
Can the conditioner deposit tone alone?
Yes for maintenance between washes with the deposit shampoo, but the pair is designed to work as a system.
What does the trio add?
The weekly mask deepens what the daily pair maintains — and trios are the salon-retail bundle that wins the bathroom shelf.
What you can change on this build
- Matched-pair pH system
- Deposit tone variants
- Trio set with mask
- Salon pro sizes
Why texture is signed off against a sample
Two emulsions can share a viscosity reading and still feel entirely different in the hand. That is why the retained Golden Sample is kept on file and a batch is compared with it at release rather than with a written tolerance alone.
Production runs on GMPC and ISO 22716 certified lines under manufacturing licence 粤妆20250206, with traceability from raw material to carton on every batch.
Send the texture you want to match
If there is a product whose feel you want to reproduce, send it. Reverse development rebuilds a comparable base, and the approved sample becomes your production reference.