Private Label Peel-Off Mask
The satisfying peel — one slow pull, instant visual proof.
Format and usage options
- Single-piece peel validation testing
- Charcoal / gold / pink pigment variants
- Nose-strip format extension
- Satisfying-video content pack
Build out the mask range
Private Label Charcoal Mask
The black jar that photographs itself — activated charcoal deep-cleanse.
Private Label Clay Mask
The 10-minute ritual with the visual demo — clays that purify without the tight-squeak.
Private Label Pore Minimizing Serum
Two promises in one bottle — instant blur now, tighter-looking pores over time.
Buyer guides for this build
Before you brief a supplier on this category, these are the guides that answer the questions buyers ask next — timelines, order quantities, cost structure and compliance.
What the dwell time actually delivers
INCI names and typical levels reflect publicly documented formulation practice. All values are adjustable in your build.
| Ingredient (INCI) | Typical Level | Function & Benefit |
|---|---|---|
| Polyvinyl Alcohol (PVA) | 10–18% | Single-piece film formation |
| Charcoal Powder | 1–3% | Reveal-visual pigment |
| Glycerin | 3–5% | Flexibility plasticizer |
| Witch Hazel Extract | 1–2% | Astringent support |
Where the compliance file comes from
The line is GMPC and ISO 22716 certified, and each batch carries raw-material-to-carton traceability under licence 粤妆20250206.
For a mask the file is built on the in-use preservation study and the fill weight of the unit, with the certificate of analysis, stability summary, microbiology report and MoCRA / CPNP-ready documentation attached to the order. Each batch is released against the retained Golden Sample.
Peel-off mask is satisfaction content in a tube: apply, dry, and pull off one intact film that customers swear they can see their week in. The film must dry to proper tack in 10–15 minutes and peel in one piece — a failed peel is a returned product.
We engineer PVA film systems with plasticizer balance for the clean single-piece peel, add charcoal or gold pigments for the reveal shot, and word the claim honestly (surface impurity look) while the demo does the heavy lifting.
Pack formats, MOQ and lead time
Mixed-variant orders can split the stated MOQ across formats under one brand.
| Format / Specification | MOQ | Lead Time |
|---|---|---|
| Charcoal peel-off mask 80 ml tube | 1,000 pcs | 10–15 days |
| Gold foil peel-off variant 80 ml | 1,000 pcs | 10–15 days |
| Nose-strip + full-face duo pack | 1,000 sets | 10–15 days |
MOQ and lead time above are the standard liquid, cream and gel route. The real minimum is set by the manufacturing system rather than the category: surfactant systems (shampoo, body wash) start at 2,000 pcs, stick formats at 3,000, and powders and sheet masks at 5,000 — with longer production runs to match.
What gets decided before the dwell time
Preservation after opening
A jar mask meets air and fingers at every use, so the preservation study runs against that in-use pattern rather than sealed shelf life alone.
The ten-minute expectation
Customers time a mask against what the pack told them. A product that is still tacky at the stated dwell is read as a failure even if the actives performed.
Appearance in the jar
Clay and cream masks can settle or dry in the pack. Fill level and pack geometry are chosen to keep appearance consistent.
Removal without damage
Peel-off and wash-off formats both have to come away without pulling at the skin, which is a film-former and plasticiser question.
The route a dwell-time product takes through production
- 1
Control the fill weight
In a single-use format fill weight is the dose, so it is checked per unit rather than on an average of the batch.
- 2
Hold for microbiological release
Wet formats are released on a microbiological result, and for a jar the in-use study is part of the file.
- 3
Set the dwell time and the claim
How long the mask stays on decides how much active it can carry and what it can credibly claim.
- 4
Verify against the retained sample
Appearance, texture and behaviour at dwell are checked against the sample your buyer approved.
Ten minutes is a formulation constraint
The dwell time printed on the pack is a promise, and everything in the formula has to still be acceptable at the end of it. A texture that is pleasant at minute one and irritating at minute ten has failed the brief.
That is why drying behaviour, tack and how the product moves as the customer talks or walks are assessed on skin for the full dwell rather than only at application.
Mask formats and what each one delivers
Single-use and multi-use formats carry different preservation files, so the route is settled before the pack.
| Format | Release behaviour | Typical brief |
|---|---|---|
| Overnight leave-on | Absorbs fully with no rinsing step | Routines built around sleep |
| Peel-off | Forms a film, removed in one piece | Formats that demo well in short video |
| Sheet and patch | Occlusive, even delivery across the dwell | Single-use and travel-friendly formats |
| Clay and mud | Absorptive, drying, visibly tightening | Purifying and oil-control positioning |
Dwell time and usage questions
Does it really remove blackheads?
It lifts surface debris and vellus hair look — the honest claim; deep comedones need extraction. Customers buy the visible proof regardless.
Why do cheap ones tear mid-peel?
Plasticizer balance — too rigid tears, too soft smears. Our film passes the single-piece pull test at 15 minutes dry.
Frequency guidance?
Once weekly maximum; we print it — over-use drives the irritation reviews that kill the category's repeat rate.
Tell us how it comes off
Peel, rinse or leave on — removal is part of the product experience and it changes the base. Send the routine and we quote the format.