Private Label Cleansing Oil
The first-step cleanser that melts SPF and makeup — rinse-clean without the greasy film.
Anhydrous formats forgive some things and punish others
There is no water for microbes and no hydrolysis to break down esters, which makes preservation and pH far simpler than in a fluid. What replaces them is an unforgiving sensitivity to oxygen and light.
So the pack carries more of the design than it would in an emulsion, and the choice between airless, glass and aluminium becomes a shelf-life decision rather than a look.
Anhydrous routes and what each one is built for
Each route changes both the sensory result and the shipping requirement — they are not independent choices.
| Route | Feel and behaviour | Typical brief |
|---|---|---|
| Structured balm | High melt point, protective film | Barrier and winter-positioned products |
| Antioxidant-tuned system | Built against rancidity | Oils sold into hot, humid markets |
| Jojoba-ester base | Close to skin lipids, light on the skin | Sensitive-skin and facial oils |
| Squalane-led oil | Light, non-greasy, absorbs steadily | Face and body oils for daily use |
Cleansing oil is the K-beauty double-cleanse export that Western shelves now stock as standard: an oil phase that dissolves sunscreen and long-wear makeup, then emulsifies white and rinses clean with water. The technology is in the emulsifier choice — poor builds leave film, good ones leave nothing.
We build with rinseable esters and polyglyceryl emulsifiers tuned to your water hardness profile, since emulsification behavior changes between soft and hard tap water. Lightweight 'dry-touch' and richer massage oils both available.
Build out the oil range
Private Label Cleansing Balm
The sorbet-texture cult product — melts on contact, rinses spotless, travels without leaks.
Private Label Amino Acid Cleanser
The gentle-cleansing standard — pH-balanced surfactant systems that never leave skin tight.
Private Label Micellar Water
The no-rinse workhorse — gentle micelles for gym bags, travel and lazy nights.
Buyer guides for this build
Before you brief a supplier on this category, these are the guides that answer the questions buyers ask next — timelines, order quantities, cost structure and compliance.
The route a waterless build takes through production
- 1
Screen the pack against the blend
Oils and fragrance can migrate into plastics and liners, so the pack is tested against the finished formula.
- 2
Filter for clarity
A warm filtration step removes particulates before the product sets and traps them in place.
- 3
Melt and hold the wax phase
Waxes and butters are held above their melting point long enough to clear the crystal memory of the raw material.
- 4
Meter the antioxidant
The antioxidant system is weighed in rather than poured to a mark, because the dose is small and a shelf-life claim rests on it.
Order sizes for each pack format
Mixed-variant orders can split the stated MOQ across formats under one brand.
| Format / Specification | MOQ | Lead Time |
|---|---|---|
| Dry-touch cleansing oil 200 ml pump | 1,000 pcs | 10–15 days |
| Rich massage cleansing oil 200 ml | 1,000 pcs | 10–15 days |
| Mini cleansing oil 50 ml (travel) | 1,000 pcs | 10–15 days |
MOQ and lead time above are the standard liquid, cream and gel route. The real minimum is set by the manufacturing system rather than the category: surfactant systems (shampoo, body wash) start at 2,000 pcs, stick formats at 3,000, and powders and sheet masks at 5,000 — with longer production runs to match.
What can be adjusted on this blend
- Dry-touch vs massage-rich textures
- Hard-water emulsification tuning
- 200 ml standard with 50 ml travel companion
- SPF-removal efficacy documentation
Why oxidative stability leads the file here
An anhydrous product does not fail by contamination; it fails by going rancid, and that process is slow enough to be missed by a bench check taken on the day of fill.
Production runs on GMPC and ISO 22716 certified lines under manufacturing licence 粤妆20250206, with traceability from raw material to carton on every batch and the retained Golden Sample held as the release reference.
Where an oil-phase build succeeds or fails
The carrier sets the feel
Light esters, heavy butters and dry oils each produce a different after-feel. In an anhydrous base the blend is the product.
Antioxidants slow, they do not stop
Vitamin E is not a preservative. The dose is set against the shelf life you intend to claim rather than added as a standard line.
Melt point and the shipping route
A balm that firms in a cold market and slumps in a hot one is a melt-point problem, solved through wax and butter ratios.
Oils migrate into packaging
Some oils soften or stain plastics and liners over time. The pack is screened against the finished blend rather than against the base alone.
What the blend is built from
INCI names and typical levels reflect publicly documented formulation practice. All values are adjustable in your build.
| Ingredient (INCI) | Typical Level | Function & Benefit |
|---|---|---|
| Ethylhexyl Palmitate / Caprylic Triglyceride | 60–80% | Makeup-dissolving ester base |
| Polyglyceryl-10 Dioleate | 2–4% | Water-rinseable emulsifier |
| Sunflower Seed Oil | 5–15% | Skin-friendly natural carrier |
Melt point, shelf life and shipping questions
Can cleansing oil remove waterproof sunscreen?
Yes — that is the category's core job; oil phases dissolve UV filters that water alone cannot, then the emulsifier rinses everything away.
Will it leave a greasy film?
Not with a properly tuned emulsifier system; we test rinse-off behavior at multiple water hardness levels before approval.
Is cleansing oil suitable for oily skin?
Yes — oil dissolves oil; many oily-skin customers prefer it over stripping foams. The dry-touch variant is positioned for exactly them.
Describe the feel, we will build the blend
Dry, silky or rich — send the after-feel you want and the pack format, and we quote the oil system within 24 hours.