Private Label Color Depositing Conditioner
Top up tone between salons — direct-dye conditioners from corrections to fashion pink.
Order sizes for each pack format
Mixed-variant orders can split the stated MOQ across formats under one brand.
| Format / Specification | MOQ | Lead Time |
|---|---|---|
| Correction shade set (violet/blue/warm) 3 × 200 ml | 1,000 sets | 10–15 days |
| Fashion shade (pink/teal/lavender) 200 ml | 1,000 pcs | 10–15 days |
| Tone-top-up duo with protect shampoo | 1,000 sets | 10–15 days |
MOQ and lead time above are the standard liquid, cream and gel route. The real minimum is set by the manufacturing system rather than the category: surfactant systems (shampoo, body wash) start at 2,000 pcs, stick formats at 3,000, and powders and sheet masks at 5,000 — with longer production runs to match.
The water phase is an ingredient, not a carrier
Humectants, salts and pH adjusters all sit in the water phase, and all of them change how the emulsion forms and how it holds together. A polyol added for skin feel shifts the interfacial behaviour at the same time.
Electrolytes are the sharpest example: a small amount can thicken a system built on one emulsifier and destabilise a system built on another. The water phase is formulated, not simply filled.
Where each route fits a brief
All of these can carry the same claim. What changes is how the product feels, how it ships and what it costs.
| Route | Texture character | Typical brief |
|---|---|---|
| Milk | Very low viscosity, spreadable | Body and large-format applications |
| Polymeric-stabilised | Light body at a low emulsifier load | Sprays and fluid lotions |
| Cold-process | Fresh, light texture | Actives that cannot take a heated oil phase |
| Concentrated base | Thick in the jar, spreads thin | Face creams sold on a little going a long way |
The route an emulsified base takes through production
- 1
Formulate the water phase
Humectants, electrolytes and pH adjusters are set as a group, because each one shifts how the emulsion forms and how it holds.
- 2
Choose the emulsifier system
The emulsifier decides texture, melt point and stability at once, so it is picked with the destination market's climate in mind.
- 3
Cool on a controlled ramp
The cooling rate decides how the fatty alcohols and butters crystallise, and therefore how smooth the finished cream turns out.
- 4
Hold for microbiological release
The batch is released on a microbiological result rather than on a production schedule.
Texture and stability questions
How long does deposited color last?
Typically 3–6 washes — the honest wash-out window that fashion customers want and salon clients accept as maintenance.
Does it stain hands or towels?
Fresh direct dye does until rinsed; gloved-application instructions and rinse-verification keep the experience controlled.
Can corrections damage hair?
No developer is involved — depositing conditioners are damage-free by design, which is the core claim over boxed toners.
Color depositing conditioners bridge two markets with one format: salon clients topping up corrections between visits, and fashion-shade customers who want pink or violet for a weekend without commitment. Direct dyes in a conditioning base deposit tone while they condition — no developer, no damage story.
Shade architecture is the product: corrections (violet, blue, red-warm) plus a fashion palette (pink, teal, lavender). Deposit strength is dose-tuned so bold shades stay bold and corrections stay subtle — the calibration that separates a usable SKU from a bathroom disaster.
The choices that fix texture and shelf life
Emulsifier level is a narrow window
Too little and the system separates; too much and it drags on application and feels soapy. The window is found by trial rather than calculated.
Preservation across two phases
An emulsion splits a preservative between oil and water. Efficacy is tested against the finished matrix, because partitioning can leave the water phase under-protected.
Viscosity against the fill line
A base that is too thick at fill temperature traps air and gives variable fill weights. The target is set against how it behaves on the line, not only in the jar.
Silicone or silicone-free
Silicones give instant, predictable slip. A silicone-free route has to rebuild that feel with esters and butters — both work, and the choice is usually a market one.
How a cream is released, batch by batch
Emulsification and filling run in-house on GMPC and ISO 22716 certified lines under licence 粤妆20250206, with each batch traceable from raw material to carton.
Release reads viscosity, pH and appearance at fill and compares the batch with the retained Golden Sample, because texture is the property a number describes least well.
What this emulsion is built around
INCI names and typical levels reflect publicly documented formulation practice. All values are adjustable in your build.
| Ingredient (INCI) | Typical Level | Function & Benefit |
|---|---|---|
| Direct dyes (HC Blue/Red/Violet class) | 0.1–1% | Deposit tone by shade |
| Behentrimonium Methosulfate | 2–3% | Conditioning deposit base |
| Hydrolyzed Keratin | 0.5–1% | Color-treated fiber support |
Build the range around it
Private Label Purple Shampoo
Brass correction in a bottle — pigment-tuned violet systems for blonde and silver clients.
Private Label Color Protect Conditioner
Seal the color in — acid-pH emulsions that close the cuticle dye escapes through.
Private Label Silver Shampoo
Brightness for silver hair — blue-violet systems that keep grey luminous, not yellow.
Buyer guides for this build
Before you brief a supplier on this category, these are the guides that answer the questions buyers ask next — timelines, order quantities, cost structure and compliance.
What can be adjusted on this emulsion
- Correction and fashion shade palettes
- Deposit-strength calibration
- Shade-family insert cards
- Duo and set architectures
Tell us the texture you want in the hand
Describe the after-feel, the pack format and the climate it ships into. We match the emulsion route and quote within 24 hours.