Home›Products›Hair Care›Private Label Co-Wash
Surfactant Engineering · Private Label

Private Label Co-Wash

The wash that conditions while it cleanses — no lather anxiety allowed.

Co-WashConditioning-CleanseCurly-CommunityUltra-MildCult-Format
Private Label Co-Wash — private label & OEM manufacturing

Traceability from raw material to carton

Each batch is traceable from the incoming raw material through to the sealed carton, on GMPC and ISO 22716 certified lines operating under licence 粤妆20250206.

For a wash the file pairs that traceability with the retained Golden Sample, which is what a batch is compared against at release when the lather or the viscosity has to be judged rather than only recorded.

Buyer guides for this build

Before you brief a supplier on this category, these are the guides that answer the questions buyers ask next — timelines, order quantities, cost structure and compliance.

The label percentage tells you almost nothing about a wash

In a rinse-off product the active has seconds of contact and unlimited dilution working against it. Dosing for what remains after that is a different calculation from dosing a leave-on, and it is the calculation that decides whether a claim is worth printing.

The rest is texture and rheology. How the base thickens in the hand, how the foam builds, and whether hair or skin feels stripped or cushioned afterwards — all of it comes from the surfactant blend, not from the headline ingredient.

The cleansing systems we can fill today

Every system below is production-ready today. Which one we build is decided by the claim and the price tier, not the other way round.

SystemLather characterWhere it fits
Sulfate systemsHigh volume, instant foamValue and clarifying tiers with no sulfate-free claim
Isethionate blendDense and cushioned, close to conventionalBrands that cannot accept a lather downgrade
Glucoside and glycinateCreamy and dense at the same timePremium facial cleansers and body washes
Sarcosinate blendFast-building with a clean rinse-offDaily-wash lines where residual feel matters

Questions buyers ask before a first run

Does co-wash actually clean the scalp?

At our amphoteric doses, yes — the failure mode of bad co-washes is buildup, which is why we publish the three-week verification.

Tub or bottle?

Tub — the tradition is scooping with fingers; the wide opening is part of the ritual's ergonomics.

Straight hair allowed?

The community will joke, the dry-hair mainstream will buy — position honestly to both.

Co-wash replaces shampoo with a cleansing conditioner: surfactants mild enough for daily use, conditioners rich enough to define curls. The curly community made it a ritual; the dry-hair mainstream is following.

We balance genuinely cleansing amphoteric doses with rich cationic conditioning, verify scalp-clean without buildup across three weeks of use (the co-wash failure mode), and design the tub packaging the format tradition expects.

The parts of the brief that matter most

Hard water changes the foam

Calcium and magnesium in the supply collapse lather and can leave insoluble residue. Chelation is specified against the hardness of the destination market.

Where the activity actually happens

Contact time is measured in seconds and the rinse dilutes everything. We dose for what remains on the surface instead of for the number printed on the front of the pack.

A mildness claim needs a method

Protein-denaturation and zein testing give a comparable number across systems, and one of them is usually what a mildness claim rests on. The test is run against your finished blend rather than the raw material's published figure.

Fill viscosity is not shelf viscosity

A base that pumps cleanly on the line can be noticeably thicker in the bottle a month later. Both ends of the curve belong in the specification.

Claim and format options

  • Three-week no-buildup verification
  • Tub format with wide opening
  • Scalp-brush kit bundling
  • CG ecosystem participation pack

How we take a wash from brief to released batch

  1. 1

    Adjust viscosity at fill temperature

    Thickening is adjusted at the temperature the product will actually be filled at, not at the temperature it was made at.

  2. 2

    Lock the pH window

    pH is specified with a tolerance and verified at fill, because it moves the foam, the viscosity and the comfort of the finished wash together.

  3. 3

    Verify against the approved sample

    Every batch is compared with the retained Golden Sample before release, so the bottle your customer opens matches what you signed off.

  4. 4

    Check clarity at the cold end

    The batch is cooled to the coldest shelf the product will see and checked for haze, which is where a marginally soluble component shows up first.

Pack formats, MOQ and lead time

Mixed-variant orders can split the stated MOQ across formats under one brand.

Format / SpecificationMOQLead Time
Co-wash tub 350 ml1,000 pcs10–15 days
Co-wash + scalp-brush kit1,000 sets10–15 days
CG complete kit (co-wash + low-poo + cream)1,000 sets10–15 days

MOQ and lead time above are the standard liquid, cream and gel route. The real minimum is set by the manufacturing system rather than the category: surfactant systems (shampoo, body wash) start at 2,000 pcs, stick formats at 3,000, and powders and sheet masks at 5,000 — with longer production runs to match.

The cleansing system behind the claim

INCI names and typical levels reflect publicly documented formulation practice. All values are adjustable in your build.

Ingredient (INCI)Typical LevelFunction & Benefit
Coco-Betaine5–10%Gentle cleansing base
Behentrimonium Methosulfate1–3%CG-safe conditioning
Cetearyl Alcohol3–6%Creamy structure
Shea Butter2–5%Curl nourishment

Tell us the hair you are selling to

Fine, coarse, curly or chemically treated — the substrate decides more of the blend than the claim does. Send it and we quote the system within 24 hours.

WhatsApp UsGet a Quote