Private Label Gentle Foaming Wash
Sensitive skin's body wash — foam that cleans by being gentle.
Documentation that ships with the order
Every production order leaves with a certificate of analysis, a stability summary, a microbiology report and MoCRA / CPNP-ready documentation, produced on GMPC and ISO 22716 certified lines under licence 粤妆20250206.
The retained Golden Sample stays on file as the physical reference, so a reorder two years later is still measured against the same lather, viscosity and appearance the original batch was released on.
Where the decisions get made in a wash
Preservation in a hostile base
A high-water, high-surfactant matrix is difficult for most preservative systems. The challenge is put to the preservation study rather than assumed from the raw materials.
Fill viscosity is not shelf viscosity
A base that pumps cleanly on the line can be noticeably thicker in the bottle a month later. Both ends of the curve belong in the specification.
Deposition is not the same as delivery
A rinse-off carries solids away as easily as it deposits them. Silicones and conditioning polymers are dosed for what survives the rinse rather than for the load in the bottle.
Colour protection is pH-dependent
Dyed hair releases colour fastest away from the pH the dye was set at. A colour-care wash is therefore specified around a pH window rather than around a surfactant claim on its own.
The actives doing the work in this base
INCI names and typical levels reflect publicly documented formulation practice. All values are adjustable in your build.
| Ingredient (INCI) | Typical Level | Function & Benefit |
|---|---|---|
| Coco-Glucoside | 5–8% | Non-stripping primary |
| Glycerin | 3–5% | Moisture retention |
| Beta-Glucan | 0.2–0.5% | Comfort soothing |
Questions we answer on every cleansing brief
Why foam pump instead of gel?
Foam reduces rubbing and rinses fast — mechanically gentler for reactive skin, and it photographs beautifully.
Can we claim for eczema?
No treatment claims — 'suitable for eczema-prone skin' wording varies by market; we review per destination.
Patch testing included?
Yes — 30-person panel on the finished formula, report included for your compliance file.
Gentle foaming wash serves the customer every brand claims but few formulate for: reactive, eczema-adjacent, easily-stripped skin. The system is amphoteric-and-glucoside only, the pH is 5.5, and the foam pump does the luxury work so the formula can stay boring.
We build on minimal-ingredient systems with fragrance-free defaults, verify mildness with patch panels, and source pump-foam dispensers that make a simple formula feel premium — the category's favorite trick.
Claim and format options
- Patch-panel mildness data
- Fragrance-free default
- Pump-foam dispenser sourcing
- Sensitive-skin claim wording
The stages this wash passes through
- 1
Homogenise to a defined energy input
How hard the batch is mixed changes the micelle structure and with it the finished viscosity, so the mixing energy is specified rather than left to the operator.
- 2
Flush the headspace
Where the formula carries an oxygen-sensitive component, the headspace is displaced before the cap goes on.
- 3
Premix the conditioning phase
Cationic conditioning agents are hydrated and dispersed separately before they meet the anionic matrix, so they deposit instead of neutralising in the bulk.
- 4
Hold for microbiological release
The batch waits for its microbiological result rather than shipping against a pending one.
Formats and order quantities for this wash
Mixed-variant orders can split the stated MOQ across formats under one brand.
| Format / Specification | MOQ | Lead Time |
|---|---|---|
| Foaming wash 300 ml pump | 1,000 pcs | 10–15 days |
| Fragrance-free sensitive variant | 1,000 pcs | 10–15 days |
| Family value size 500 ml | 1,000 pcs | 10–15 days |
MOQ and lead time above are the standard liquid, cream and gel route. The real minimum is set by the manufacturing system rather than the category: surfactant systems (shampoo, body wash) start at 2,000 pcs, stick formats at 3,000, and powders and sheet masks at 5,000 — with longer production runs to match.
Hard water is where a good wash is judged
Calcium and magnesium change how a surfactant behaves: foam collapses sooner and insoluble salts can deposit on skin or hair. A market with hard water needs a system built for that water rather than a formula that only performs in a soft-water laboratory.
It is also a chelation question. A builder or chelating agent keeps the surfactant working in the water the customer actually has, and it is specified against the hardness of the destination rather than as a standard line.
The cleansing systems we can fill today
The route below is a starting point rather than a constraint — a blend can be tuned between two of them without changing the claim it carries.
| System | Lather character | Where it fits |
|---|---|---|
| Glucoside-led | Creamy, finer bubbles, slower to build | Strict sulfate-free and curl-method briefs |
| Non-ionic-led | Very low foam, high mildness | Cleansers for reactive or post-procedure skin |
| Taurate systems | Soft lather that holds up in hard water | Premium bars and sulfate-free liquids |
| Sulfate systems | High volume, instant foam | Value and clarifying tiers with no sulfate-free claim |
Other cleansing and care builds
Private Label Feminine Wash
pH 3.8–4.5, extra-mild surfactants, and claims that survive scrutiny.
Private Label Aloe Body Gel
The green bottle every household owns — aloe done honestly.
Private Label Ceramide Body Lotion
Barrier science at body scale — lipid-replenishing systems for skin that drinks lotion and asks again.
Buyer guides for this build
Before you brief a supplier on this category, these are the guides that answer the questions buyers ask next — timelines, order quantities, cost structure and compliance.
Send the reference product
If there is a wash whose lather you want to match, send it. Reverse development rebuilds a comparable base, and the approved sample becomes your production reference.