Home›Products›Body Care›Private Label Foot Peel
Dwell-Time Products · OEM / ODM

Private Label Foot Peel

The before-and-after that sells itself — peeling booties with a 7-day story.

AHA-BootiePeeling-EffectViral-Before-AfterSingle-UseGift-Channel
Private Label Foot Peel — private label & OEM manufacturing

A mask is judged in the first two minutes, then again at removal

Customers decide whether a mask works before the dwell is even over — from how it applies, whether it stays where it was put, and how it feels as it sets. All three are formulation outcomes rather than marketing ones.

Removal matters just as much. Anything that pulls at the skin or leaves residue turns the product into a one-time purchase, whatever it claimed on the front of the pack.

The dwell-time formats we produce

A mask that dries too fast and one that never sets are the same failure told from opposite ends.

FormatRelease behaviourTypical brief
Wash-off cream maskRinses clean and leaves no residueHydration in a short routine step
Sheet and patchOcclusive, even delivery across the dwellSingle-use and travel-friendly formats
Cream and sleepingLeave-on, no rinse, slow releaseOvernight and hydration-led routines
Gel maskTranslucent, cooling, no dryingHydration and after-sun positioning

Foot peel booties own the most dramatic before-and-after in all of bodycare: seven days after one wear, skin peels away to reveal soft soles — content so inherently viral that the category markets itself. Single-use booties with an AHA-rich inner liner are the entire product.

We produce booties with glycolic-lactic inner treatments at home-safe levels, seal in single-use sachets, and write the honest insert (peel starts day 3–5, do not force it) that keeps reviews five-star and returns low.

Why the in-use study matters more here

A jar mask meets air and fingers at every use, which is a very different exposure from the sealed shelf life. The in-use preservation study replicates that pattern rather than assuming it away.

Production runs on GMPC and ISO 22716 certified lines under manufacturing licence 粤妆20250206, with traceability from raw material to carton on every batch. Appearance, texture and dwell behaviour are checked against the retained Golden Sample at release.

What shapes release during the dwell

Fit across face shapes

One cut does not suit every market. Where a category is competitive, the cut is treated as part of the product rather than a purchasing line item.

Removal without damage

Peel-off and wash-off formats both have to come away without pulling at the skin, which is a film-former and plasticiser question.

Single-use versus multi-use

A sachet removes in-use contamination, a jar gives better economics. The choice is a market decision with a formulation consequence.

Sheet saturation level

A sheet can hold only so much liquid without dripping. Saturation is tuned against the pack, the shelf life and how the customer applies it.

Buyer guides for this build

Before you brief a supplier on this category, these are the guides that answer the questions buyers ask next — timelines, order quantities, cost structure and compliance.

Where this formula can be adjusted

  • Home-safe actives calibration
  • Single-use sachet sealing
  • Honest timeline insert
  • Gift-trio bundling

The stages this mask passes through

  1. 1

    Tune the drying and comfort profile

    The mask is assessed on skin for the full dwell time, not only at the moment of application.

  2. 2

    Verify the cut and fit

    Cut geometry is checked against the reference so the mask sits the way the approved sample did.

  3. 3

    Check the dwell behaviour

    Drying, setting and rinsing are re-checked on the approved sample so the behaviour the buyer signed off is the behaviour that ships.

  4. 4

    Wet the substrate to specification

    For a sheet format the saturation level is set and verified, because it decides both the dose delivered and whether the pack leaks.

What this mask can be filled into

Mixed-variant orders can split the stated MOQ across formats under one brand.

Format / SpecificationMOQLead Time
Foot peel bootie pair1,000 pairs10–15 days
Two-pack value box1,000 boxes10–15 days
Gift trio (peel + balm + socks)1,000 sets10–15 days

MOQ and lead time above are the standard liquid, cream and gel route. The real minimum is set by the manufacturing system rather than the category: surfactant systems (shampoo, body wash) start at 2,000 pcs, stick formats at 3,000, and powders and sheet masks at 5,000 — with longer production runs to match.

What the dwell time actually delivers

INCI names and typical levels reflect publicly documented formulation practice. All values are adjustable in your build.

Ingredient (INCI)Typical LevelFunction & Benefit
Glycolic Acid3–6%Primary renewal acid
Lactic Acid3–6%Gentle co-exfoliant
Urea5–10%Softening support

Removal, fit and pack questions

When does peeling start?

Days 3–5 typically, complete by day 7–10. The insert sets this expectation — mismatched expectations are this category's only real complaint driver.

How often can it be used?

Every 4–6 weeks maximum; the insert and marketing both state it — restraint protects the customer and the re-purchase rhythm.

Why is this such a strong gift SKU?

The story is the demo: 'wait a week, then look' — recipients become buyers, which is how the category grows.

Tell us the dwell time

Ten minutes or overnight decides the whole build. Send the usage pattern and the format, and we quote within 24 hours.

WhatsApp UsGet a Quote