Short answer: a stock mould has no tooling fee and no tooling lead time; a custom mould buys differentiation and charges for it upfront, whether or not the product sells. The break-even is a volume and a differentiation question, not a price question.

Packaging conversations usually start with the unit price and end with the tooling invoice. That order is backwards. Tooling is a fixed cost that has to be recovered across the life of the pack, so it belongs in the same calculation as the fill volume, the decoration and the launch date — and for most first launches, it is the item that decides whether the product ships in seven days or in three months.

This guide sets out the cost structure, the decision table, and the hidden costs that make a "cheaper" custom pack more expensive than it looks.

The cost structure of a pack, in layers

Cost layer What it covers Paid when Recoverable
Mould or tooling Cavity set, hot runner, inserts, texture Once, before first production No — amortised into unit cost
Trial and sampling Trial shots, dimensional report, sample shipment At development No
Modification Gate position, wall thickness, fit tolerance After trial, sometimes more than once No
Decoration tooling Screen or pad printing frames, hot-stamp dies, spray jigs Before decoration No
Packaging MOQ Minimum run per component and per decoration Per order No, but inventory carries forward
Assembly and pack-out Lining, filling, capping, cartoning Per order No

The first four layers are what people mean by "tooling", and they are all sunk. The fifth is the one that surprises brands: even with a stock mould, decoration has its own minimum, and a two-colour print on a 30 ml bottle can carry a minimum that exceeds the filling MOQ.

What a stock mould actually gives you

A stock mould is a tool that already exists because another product uses it. In practice that means:

  • No tooling fee and no tooling lead time. The mould is not being cut for you.
  • Samples in about seven days, because the pack is already running.
  • MOQ from 1,000 pcs per SKU, set by the filling run rather than by the mould.
  • A defined size and shape, with the differentiation moved to decoration: colour, print, label, cap finish.

That last point is the trade-off. Two brands using the same 50 ml jar will look different if one is frosted with a matte label and the other is clear with a metallised cap, but the silhouette is shared. For a first launch, a relaunch, or a range extension, that is usually an acceptable trade — and it is the reason a stock library is measured in thousands of moulds rather than dozens.

Our packaging library lists 4,128 stock moulds across 12 categories, each with a photograph and its own page, which is enough range that most briefs can be met without cutting a tool.

What a custom mould buys, and what it costs

A custom tool buys three things: a silhouette nobody else has, a capacity or geometry the stock range does not cover, and sometimes a structural feature — a refillable core, an airless piston geometry, a specific dose per stroke.

What it costs:

  • A tooling fee paid before production. The amount scales with cavitation, steel grade, hot-runner complexity and texture. A single-cavity tool for a simple jar and an eight-cavity tool with a hot runner for a thick-walled bottle are not in the same order of magnitude.
  • A development timeline. Design, tool cutting, trial shots, dimensional review, modification, then production. This is the item that turns a six-week launch into a sixteen-week one.
  • A minimum run that justifies the tool. A tool amortised over 30,000 units is a different proposition from the same tool amortised over 5,000.
  • Risk concentrated before revenue. If the product underperforms, the tool is not recoverable, and the pack cannot be repurposed easily.

Three questions decide whether it is worth it: does the silhouette carry the brand's differentiation, does the volume support amortisation within the first two orders, and does the pack need a structure that no stock mould has?

The decision table

Dimension Stock mould Custom mould
Tooling fee None Paid upfront, scales with cavitation and complexity
Time to first sample About 7 days Weeks to months, including trial and modification
Differentiation Decoration and cap finish Silhouette and structure
MOQ From 1,000 pcs per SKU Set by the tool and the run economics
Risk if the product fails Minimal — pack is reusable across projects Tool is stranded
Best fit First launch, test batch, range extension Proven volume, structural claim, brand-defining hero pack
Decoration cost Often the dominant variable Same, plus jig and fixture cost

A workable rule: launch on stock, prove the sell-through, then cut a tool for the hero SKU once the volume is real. Brands that invert the order usually fund a tool with the first order and discover the margin problem in the second.

Hidden costs that flip the comparison

Decoration minimums. A custom pack usually needs a custom decoration solution — a print frame sized to the surface, a jig to hold an unusual shape, a spray mask. Those are tools too, and they are easy to miss in a quote that lists only the mould.

Yield and scrap. A new tool runs at a lower yield for the first production runs while the process settles. The scrap is billed, and on a small run it can equal the tooling fee.

Inventory. Custom packaging is ordered in the tool's economic batch, which is often larger than the filling batch. The surplus sits in a warehouse and is charged to the product whether or not it sells.

Change cost. A stock pack can be replaced by another stock pack when a colour or capacity change is needed. A custom pack change means modifying or re-cutting the tool.

Time value. A launch delayed by ten weeks has a cost that rarely appears in the packaging budget but is usually larger than the tooling fee.

Where decoration fits

For stock packs, decoration is where the brand differentiation is bought, and it has its own cost ladder:

  • Label — lowest tooling, highest flexibility, weakest premium signal on a premium pack.
  • Screen or pad print — a frame cost per colour, good on cylindrical surfaces, limited on complex geometry.
  • Hot stamp — a die per design, strong on caps and flat surfaces.
  • Spray or soft-touch coating — a jig and a masking step, strong perceived value, sensitive to scratch testing.
  • Metallisation — highest cost and longest lead time, usually reserved for a hero SKU.

The practical sequence is to choose the pack, then choose the decoration that fits the pack's geometry, then check the decoration minimum against the fill volume. Doing it in the other order produces a beautiful sample that cannot be produced at the order quantity.

Timeline comparison, honestly

Stock pack with a label: artwork plus seven-day samples, then production inside the standard window of 10–15 days once the bulk is released.

Stock pack with print: add frame production and a print proof round, typically one to two weeks before the filling date.

Custom pack: design and tooling quotation, tool cutting, trial shots, dimensional review, modification, then production. Even a smooth project consumes the better part of a quarter, and a modification loop can add a month.

Negotiating points that actually move money

  • Ask which mould the pack uses and whether it is shared. A shared mould has no tooling fee; a "stock" pack that turns out to be exclusive is a different conversation.
  • Ask for the decoration minimum separately from the filling minimum. The two are often set by different suppliers.
  • Ask what the tool costs at two cavitation levels. The jump from one cavity to four is rarely linear.
  • Ask who owns the tool. If you pay for it, the ownership and the right to move it should be in writing.
  • Ask for the trial-shot dimensional report. It is the document that predicts whether the cap will leak.

Our packaging formats comparison covers which formats suit which product, and the unit cost breakdown shows how packaging sits against bulk and filling in the delivered cost.

FAQ

Q: Does a stock mould really have no tooling fee? A: Correct — the tool already exists, so there is nothing to cut. There may still be decoration tooling, such as a print frame or a hot-stamp die, and that is quoted separately from the pack.

Q: At what annual volume does a custom mould pay back? A: It depends on the tool cost and the unit saving, but the honest test is whether the tool is recovered within the first two orders. If it needs five, the volume is not yet proven enough to carry the risk.

Q: Can a custom pack use the same decoration as a stock pack? A: Sometimes, but unusual geometry usually needs a dedicated jig or frame, which is an additional tool cost. Ask for the decoration tooling as a separate line in the quote.

Q: How long does a custom tool add to a launch? A: Typically several weeks for cutting and trialling, plus at least one modification round. A quarter from approval to production is a realistic planning assumption, not a worst case.

Q: Who owns the mould if the brand pays for it? A: Ownership should be stated in the tooling agreement, along with the right to transfer it. Without that clause, the tool may be unusable if the supplier relationship changes.