Home / Packaging / By product / Salicylic Acid Toner

Packaging for salicylic acid toner — 13 stock moulds, no tooling fee

An acid toner is a low-viscosity, low-pH aqueous product used in high volume per application, so the pack is a bottle with a disc-top or a pump — 100–200 ml is the working range, and the dispenser has to be able to deliver a soaked cotton pad rather than a drop.

443salicylic acid toner formulas in the library
PET Screw-cap Bottlesthe pack we would start with
50–500 ml/gcapacity range available
1,000 pcsMOQ · samples in 7 days

Start here

Salicylic Acid Toner is one of 443 formulas in the library that fall into this form. Across the whole library, 53% of them are built for a pet screw-cap bottles — that is the format the form itself is designed around, not a preference we hold. If the formula you pick is lighter or heavier than the typical salicylic acid toner, the recommendation moves with the viscosity, which is why every formula page in the library shows its own pack pairing rather than a category rule.

Typical textures in this group: Acid toner, Viscous essence-toner, Clear watery toner, Mist toner.

Moulds that fit

Screw-cap White stock mould
FWG20
Screw-cap White
PP100ml, 150ml, 200ml
Screw-cap White stock mould
FWG21
Screw-cap White
PP100ml, 150ml, 200ml
Screw-cap White stock mould
FWG42
Screw-cap White
PP100ml, 150ml, 200ml
Screw-cap White stock mould
FWG43
Screw-cap White
PP100ml, 150ml, 200ml
Screw-cap White stock mould
FWG44
Screw-cap White
PP100ml, 150ml, 200ml
Screw-cap White stock mould
FWG45
Screw-cap White
PP100ml, 150ml, 200ml
FY124 Glass Lotion Series stock mould
HJ-4139
FY124 Glass Lotion Series
Glass30g, 30ml, 40ml…
FY125 Glass Lotion Series stock mould
HJ-4049A
FY125 Glass Lotion Series
Glass30g, 40ml, 50g…
FY126 Glass Lotion Series stock mould
HJ-4049A
FY126 Glass Lotion Series
Glass30g, 40ml, 50g…
Black & Yellow ribbed gradient Glass PET Spray Bottle stock mould
NR-08
Black & Yellow ribbed gradient Glass PET Spray Bottle
Mixed
Black ribbed gradient Glass PET Spray Bottle stock mould
NR-09
Black ribbed gradient Glass PET Spray Bottle
Mixed
Glass Bottle stock mould
OX-GB07
Glass Bottle
Glass
Glass Bottle stock mould
OX-GB08
Glass Bottle
Glass

What to avoid

Low pH plus alcohol plus a clear PET bottle is the combination to avoid: it is the stress-cracking case. Keep acids in PP or glass, and keep the closure off the product as much as possible — a disc-top beats a pump here because there is nothing to clog.

Example formulas in this library

These are six of the 443 formulas that match this form. Filter the full set on the toners page, or pair any mould above with any formula — one request, one quote covering both.

Fill and pack, one quote

Send us the mould reference and the product form. We reply within 24 hours with one FOB price covering the fill, the decoration and the tooling position (there isn't one — every mould here is running), plus the compliance route for your destination market.

Start a combined quote →

Other product forms

Retinol SerumVitamin C SerumNiacinamide SerumHyaluronic Acid SerumPeptide SerumBakuchiol SerumAzelaic Acid CreamCeramide Barrier CreamSPF SunscreenGlycolic Acid TonerTranexamic Acid SerumEye CreamClay MaskCleansing BalmMicellar WaterBody LotionShampooHair OilFoundation & Skin Tint